Interesting Facts About Mold
What is mold?
Mold, or fungi, exists all around us, both inside our buildings and outside. We are currently aware of more than 100,000 species of mold. There are 1,000+ species of mold that are commonly seen in the United States. The most commonly detected mold species are Cladosporium, Penicillium, Stachybotrys and Aspergillus.
Where is mold found?
Mold can grow very easily in areas where water or dampness (basements, attics, bathrooms) is present. With so many different types of mold species, they all have ideal food sources. Molds commonly grow on porous or semi-porous materials like carpets, wood, paper, drywall, ceiling tiles and food. In situations where excess moisture or water exists indoors, mold growth will most likely occur. It can get worse if the source of the water or moisture problem remains undiscovered or is disregarded.
What are some of the different types of mold?
Aspergillus is an international fungus that can be found worldwide. This mold is often secluded from dirt and vegetal materials, especially in temperate and sub-tropical areas. Aspergillus spores are commonly dispersed through the air.
Cladosporium is also another type of mold that can be commonly found throughout the world. It is normally isolated from food, plant fragments, leaves, soil, fabrics, wood and other building materials. Cladosporium is a frequently secluded mold in air samples in both the indoor and outdoor environments.
Penicillium is a close relative of Aspergillus genus and is commonly grouped together with the mold during analysis. This mold genus is most commonly found in earths, cellulose and semi porous materials foods, such as grains, and compost piles. Inside Penicillium is commonly found growing on porous or semi-porous materials like carpet, wallpaper, organic substances, and is also known to grow within fiberglass duct insulation.
Stachybotrys is highly cellulolytic. This mold is commonly categorized as the black toxic mold. This mold commonly releases a Mycotoxin known as Trichothecenes. Indoors it is commonly found in water damaged environments and will grow on anything porous or semi porous.
What are the health effects of mold?
Some genus’s of mold that are regularly encountered by humans may not effect healthy individuals. However, continuous exposure to mold, toxic or not, can cause or worsen certain conditions. They commonly cause issues in individuals with asthma, immune compromised, young children, elderly, hay fever, or other allergies. Many common indications of exposure to mold can include sneezing, itchy eyes, headache, nose bleeds, cough, congestion, and aggravation of asthma. Every individual is different and depending on the amount of exposure, more serious health issues can occur. It is important to advice with a medical professional if you have been exposed to mold.
How does mold exposure happen?
Mold release spores, similar to seeds, that are released into the air and into our breathing zone. Inhalation of the spores, directly toughing moldy materials without gloves, or unintentionally eating moldy food can expose an individuals to mold. In addition, certain mold species can produce a secondary metabolite called Mycotoxins. Mycotoxins may cause illness in people. It is important to advice with a medical professional if you have been exposed to mold or Mycotoxins.
What does mold need grow?
Molds need three main environmental components to grow; water, temperature and food. The most important of the three is water. Mold can grow almost anywhere water damage, high humidity, or dampness exists. In order to prevent mold growth, removal of the source of the water or moisture intrusion is necessary.
What is Stachybotrys chartarum?
Stachybotrys chartarum (also rffered to as Stachybotrys atra) is a species of mold that has been related to health problems in people. It commonly is a greenish-black colored mold. It grows on materials that are high cellulose –examples include ceiling tiles, cabinetry, floors, drywall, glues and adhesives for wallpaper and plaster walls. It needs and environment that is constantly moist or wet, usually caused by excessive humidity, leaks, and condensation or flooding. It is important to advice with a medical professional if you have been exposed to mold.
How do I know if Stachybotrys chartarum is present in my home or business?
With over 100,000 types of known species of molds, it is impossible to tell the type of mold just by visually looking at the growth. Stachybotrys can be certainly recognized by specially trained professionals (mycologists) under a microscopic.
How does Stachybotrys chartarum cause health issues?
In most cases, inside levels of airborne Stachybotyrs are low. Depending on the situation and the person, most molds, can cause health issues at high levels. The reactions may include, but are not limited to sneezing, coughing, rashes, wheezing, eye irritation, aggravated asthma, headaches and nose bleeds. Other symptoms may include brain fog or difficulty concentrating and lyme disease like symptoms (fatigue, muscle aches, headaches). In many cases, the symptoms mat disapate once remediation and mold remediation has been complete.
There have been white paper studies that connect Stachybotrys with lung diseases in babies who are less than six months old. Pulmonary hemosiderosis is a rare illness that causes the lungs to bleed. In regards to situations of pulmonary hemosiderosis, the exposure to Stachybotrys came from extremely contaminated properties, where the babies were constantly exposed for a long time. It is important to advice with a medical professional if you have been exposed to mold.
What should you do if mold is present in your home or apartment?
Although any visible mold can be sampled by an environmental consultant and/or analyzed by a laboratory specializing in microbiology, these tests can be very expensive – from hundreds to thousands of dollars. There is no simple and cheap way to sample the air in your home to find out what types of mold are present and whether they are airborne. Even if you have your home tested, it is difficult to say at what levels health effects would occur. Therefore, it is more important get rid of the mold rather than find out more about it. The most effective way to treat mold is to correct underlying water damage and clean the affected area.
What is the proper way to clean mold?
Visible mold growth should be addressed immediately. According to the EPA, depending on the area size of contamination and types of mold, can be cleaned using a detergent solution. Personal protective gear should always be worn when cleaning mold. Once cleaned it is important to make sure effected area is thoroughly dried to prevent future growth. Dispose of cleaning materials used to clean the mold.
In cases where the mold or mildew returns shortly after or spreads to new areas, this may indicate a continuous water intrusion issue. In order to properly control the growth of mold, sources of potential water intrusions must be controlled. If the mold growth and mold contamination is excessive, it is highly recommended to have a certified mold remediation company to do the cleanup.
Can my health and my family’s health be impacted? If so, should we see a medical professional?
If you or your family is experiencing symptoms that you feel are due to being exposed to mold, it is highly recommended to speak with a medical professional. When speaking with the medical professional make sure to discuss in detail about the symptoms experienced, as well as, when, how, and for how long were exposed.
Best Mold Removal Method? NJ, PA, NYC
Safest & Best Method to Clean Mold and Mildew
Remediation is the cleanup of the mold infestation or growth. Often we are asked the question, “If I have mold can I clean it up myself or do I need a professional?”
|The answer is; not necessarily. Essentially it depends on the type(s) of mold, the aggregate amount of colonization and size of the area. If you have less than 10 square feet of molds that are a type 1 allergen, generally these can be cleaned by the average homeowner using a detergent solution. In order to determine what type of mold you have, it is recommended to first have the proper sampling and laboratory testing performed by a qualified company.|
It is not recommended individuals untrained in bio-containment abatement procedures attempt to perform household mold remediation on molds with an aggregate area of contamination of 10 square feet or more, (regardless of the type), or on those molds, (regardless of area), which are considered to be toxic or pathogens.
Knowing how to clean mold can be more dangerous than you realize:
Consult a Trained Professional for Black Mold Removal
Homeowners performing any surface cleaning should observe proper safety precautions such as the use of surgical latex gloves, goggles, and a N95 rated mask. If using a weak bleach solution, never mix with any compound other than water. Whether in the house or with basement mold remediation, thoroughly dry the affected area(s).
Because many molds can be both pathogenic and toxic, and to ensure your health and safety and the spread of mold spores, it is recommended that you follow guidelines of an approved authority. The New York City Department of Health & Mental Hygiene Bureau of Environmental & Occupational Disease Epidemiology offers suggested guidelines on Assessment and Remediation of Fungi in Indoor Environments.
The Environmental Protection Agency (EPA) is yet another good source. At the EPA website you can find both suggested guidelines, as well as, registered products to use as a mold remover.
Before any remediation can be successful, the first step is to identify and correct the source of water or moisture. If you don’t the mold will grow back. It only takes 24 to 48 hours. We provide the best in PA, NY, and NJ Mold removers.
Business/House Mold Symptoms and the Symptoms of Mold in the House or Workplace
House Mold Symptoms
|There’s a danger lurking in many homes that is either ignored or overlooked. If left untreated its effects can be both detrimental to your pocketbook and your family’s health. That danger is MOLD! It’s in the headlines daily: “The House That Mold Ate” and “Mold Hits the High-Rent District”. Celebrities such as Ed McMahon, Bianca Jagger and Michael Jordan are not immune to the effects of mold in their homes.|
Business or House Mold Symptoms
Below is a list of symptoms of mold in the house or workplace:
• sinus congestion
• runny nose
• skin rashes
• flu-like symptoms
• irritation of the eyes, nose or throat
Symptoms of Mold in the House: What to do if you have house mold symptoms
If you are experiencing any of the bad symptoms of exposure to mold above, it may not be as simple as you think. You could have a major mold problem that not only causes an inconvenience but could just be a sign of potential serious health issues to come. You should get a mold test to see how severe your problem may be. Find the mold expert, Steve Levy.
When considering your list of questions on buying a house or business, make mold testing a priority. Business and house mold symptoms can lead to very expensive fixes and dangerous health issues. Unfortunately mold is everywhere and, as a result, you can’t afford to remain in the dark.
Are you looking for ideas on how to get musty smell out of my basement? Are you looking for ideas on how to rid basement of musty smells? Black mold on shower ceiling?
Musty smell removal is the least of your problems. Mold can create health problems by releasing toxins called mycotoxins into the air. The symptoms of exposure to mold for individuals can be allergic reactions such as watery, irritated eyes and sinus congestion to rashes, nausea and, exhaustion. More severe reactions such as asthma can also occur. According to Steve Levy of Certified Mold Inspections Inc, mold creates the #1 indoor quality complaint in the United States. Please do yourself a favor and get a mold test today.
How to get rid of Business or House Mold Symptoms: Black Mold In the House or Your Surroundings
From a Homeowner’s perspective, it is important to have a specialist who is certified to inspect your home regularly; a mold inspection by such a professional should also be performed prior to the purchase of a new home. Trying to buy or sell a house with black toxic mold can lead to major financial issues. Steve Levy explains how mold can develop into such a large problem : Mold spores comprise 25% of the world’s biomass. Generally mold in the outdoor environment is good because it’s what helps biodegrade waste. However, mold in the indoor environment can be hazardous to health if left untreated. Mold infestations may be hidden in places such as vents, wall cavities, even under floors and carpeting. With water being the key ingredient for mold to grow, the extent of any water damage should not be overlooked or ignored. Surprisingly, homes built over the last thirty to forty years may be more susceptible to mold growth due to the building materials used. Also, most newer homes don’t allow for the proper air ventilation which causes moisture. Retention of moisture stimulates present dormant mold spores leading to mold growth.
As with every subject, the best way to deal with this problem is through education. We know that water and moisture cause mold growth. How can we prevent such growth or remediate it if it already exists? Steve Levy suggests the following: Controlling moisture and water intrusion is your first line of defense. Any water event within the home must be completely addressed (dried) within 24 to 48 hours to prevent problematic mold growth. Be on the lookout for the damp, humid conditions where mold thrives: Bathrooms with poor ventilation, vents, clothes dryers and exhaust fans. Consider installing a dehumidifier in chronically moist rooms, don’t carpet damp areas. Insulate pipes and other cold surfaces to discourage condensation, install storm windows. Never delay minor maintenance and schedule proactive inspections to search for leaks in the roof, pipes and/or high chronic moisture areas. Last and certainly not least, consider having your home inspected. Mr. Levy’s company, Certified Mold Inspections, Inc. offers variety of options ranging from basic testing to a comprehensive home mold inspection. Steve Levy is a proud member of the Better Business Bureau, Business Certification Bureau, the Indoor Air Quality Association and the National Association of Mold Professionals. He carries the designations of Certified Mold Inspector, Certified Indoor Environmentalist, and Certified Thermographer. He has attended the Mid-Atlantic Environmental Hygiene Resource Center where he received certificates in Advanced Building Diagnostics and Repairs and, Advanced Microbial Assessments. Furthermore, through Skillpath Seminars, he has received a certificate in Solving Moisture and Mold Problems. Steve will be happy to answer any questions our readers may have regarding the air quality at home, how to find toxic mold in a house, or the causes of toxic mold in general.
Business/House Mold Symptoms
Knowing Symptoms of Mold in the House or Workplace
Learn to Identify Mold Types
Avoiding Mold Exposure Side Effects: NJ, PA, NYC
Home remedies to kill mold: black mold and other potential risks.
House mold prevention during construction.
Avoid potential issues like allergies and MRSA. New Jersey, New York and Pennsylvania are at risk.
Learn to Identify Mold Types & Avoiding Mold Exposure Side Effects: NJ, PA, NYC
Have you asked yourself?
How to prevent mold in drywall or basement?
How to prevent mold in wet carpet?
How do I prevent mold growth on my plants?
What is the best tactic for crawl space mold prevention? What is the best method for mildew; mold prevention in general?
Learn to Identify Mold Types & Avoiding Mold Exposure Side Effects:
Stop Mold Before it Starts
It is impossible to completely eliminate all mold spores indoors. Mold will always be found floating in the air and in house dust. For this reason, understanding how to kill mold and mildew is key to mold control. One form of mold prevention involves controlling water and moisture in indoors. Below are some home remedies to kill mold.
How to Stop and Prevent Mold
• Prevent symptoms of mold in house or business? For mold removal and mildew control, wash mold off hard surfaces and dry completely. Absorbent materials such as ceiling tiles and carpet may have to be replaced if they are contaminated.
• For better toxic mold prevention, fix leaky plumbing or sources of exterior water intrusion immediately.
• For further prevention of mold and mildew, keep drip pans in your air conditioner and refrigerator and dehumidifier clean and dry.
• Use exhaust fans or open windows in kitchens and bathrooms when showering, cooking or using the dishwasher.
• Vent clothes dryers to the outside of the home.
• Maintain low indoor humidity, ideally between 30-50% relative humidity. Humidity levels can be measured by hygrometers, which are available at local hardware stores.
• Look for mold behind cabinets or pictures on cold outside walls, where condensation can occur. Keep furniture away from outside walls.
• Check around air conditioners and furnaces for stagnant water. Keep these units serviced with regular cleaning of ducts and air filters.
• How to kill mold and mildew with green products? Use some helpful products such as spray to prevent mold in your home. Check out the Mold Store section of the site.
If the home you are thinking of buying or selling has mold, do not panic, you can remove unusual mold levels from the home and bring it back to it’s original condition.
REAL ESTATE DEALS DO NOT HAVE TO BE BROKEN!
Learn to Identify Mold Types & Avoiding Mold Exposure Side Effects: NJ, PA, NYC
Call Us Before Black Mold Illness Symptoms Find You!